These options will affect both LED and TV modes of the software.
Cinemas To Show
This is the number of cinemas that will be updated.
Seconds Delay between update
This is the number of seconds delay between when the software will attempt to update the LED's since the last update. It should be set to at least 5 seconds. This setting can have a severe impact on the performance of the computer, so care should be taken especially when there are more than 6 led lines being updated at a time.
Minutes Passed Expired Session
This is the number of minutes passed the starting time of a session before it will be removed from the available sessions. Requires that Show Expired not to be selected.
Server Polling Interval (minutes)
This is polling interval for how often the software polls the server or gateway for updated session information.
Live Sessions
Determines if the number of seats left information is used to display Sold Out/Low seats warning messages on the box office display/LEDS. This is not compatible with some third party software.
Show Expired Session Times
Determines if non-available session times should be displayed.
Rotate Films
Determines if the films and starting times should be rotated to prevent the text from burning in to the background due to continuous exposure.
Autostart Signage.
Determines if the signs should automatically be updated every time the software starts or requires operator intervention to start.
TV Mode
There are two basic modes of operation depending upon your needs:
selected - Signage will start in TV mode and requires full screen operation
non-selected - Signage will start in LED mode and can be minimized to run in the background
Note:
You must exit the software completely when changing the TV Mode before the changes will take effect.
LED Message Log (Support Only)
This option adds message logging abilities for system information and should be unselected unless requested by support.